Precise measurement of chromium isotopes by MC-ICPMS

Research output: Contribution to journalJournal articleResearchpeer-review

Standard

Precise measurement of chromium isotopes by MC-ICPMS. / Schiller, Martin; Van Kooten, Elishevah; Holst, Jesper Christian; Olsen, Mia Bjørg Stolberg; Bizzarro, Martin.

In: Journal of Analytical Atomic Spectrometry, Vol. 29, No. 8, 2014, p. 1406-1416.

Research output: Contribution to journalJournal articleResearchpeer-review

Harvard

Schiller, M, Van Kooten, E, Holst, JC, Olsen, MBS & Bizzarro, M 2014, 'Precise measurement of chromium isotopes by MC-ICPMS', Journal of Analytical Atomic Spectrometry, vol. 29, no. 8, pp. 1406-1416. https://doi.org/10.1039/c4ja00018h

APA

Schiller, M., Van Kooten, E., Holst, J. C., Olsen, M. B. S., & Bizzarro, M. (2014). Precise measurement of chromium isotopes by MC-ICPMS. Journal of Analytical Atomic Spectrometry, 29(8), 1406-1416. https://doi.org/10.1039/c4ja00018h

Vancouver

Schiller M, Van Kooten E, Holst JC, Olsen MBS, Bizzarro M. Precise measurement of chromium isotopes by MC-ICPMS. Journal of Analytical Atomic Spectrometry. 2014;29(8):1406-1416. https://doi.org/10.1039/c4ja00018h

Author

Schiller, Martin ; Van Kooten, Elishevah ; Holst, Jesper Christian ; Olsen, Mia Bjørg Stolberg ; Bizzarro, Martin. / Precise measurement of chromium isotopes by MC-ICPMS. In: Journal of Analytical Atomic Spectrometry. 2014 ; Vol. 29, No. 8. pp. 1406-1416.

Bibtex

@article{4f440f42b4a541168476cd9bc40807fb,
title = "Precise measurement of chromium isotopes by MC-ICPMS",
abstract = "We report novel analytical procedures allowing for the concurrent determination of the stable and mass-independent Cr isotopic composition of silicate materials by multiple collector inductively coupled mass spectrometry (MC-ICPMS). In particular, we focus on improved precision of the measurement of the neutron-rich isotope 54Cr. Because nitride and oxide interferences are a major obstacle to precise and accurate 54Cr measurements by MC-ICPMS, our approach is designed to minimize these interferences. Based on repeat measurements of standards, we show that the mass-independent 53Cr and 54Cr compositions can be routinely determined with an external reproducibility better than 2.5 and 5.8 ppm (2 sd), respectively. This represents at least a two-fold improvement compared to previous studies. Although this approach uses significantly more Cr (30-60 μg) than analysis by thermal ionization mass spectrometry (TIMS), our result indicate that it is possible to obtain an external reproducibility of 19 ppm for the μ54Cr when consuming amounts similar to that typically analyzed by TIMS (1 μg). In addition, the amount of time required for analysis by MC-ICPMS is much shorter thereby enabling a higher sample throughput. As a result of the improved analytical precision, we identified small apparent mass-independent differences between different synthetic Cr standards and bulk silicate Earth (BSE) when using the kinetic law for the mass bias correction. These differences are attributed to the Cr loss by equilibrium processes during production of the synthetic standards. The stable isotope data concurrently obtained have a precision of 0.05‰ Da-1, which is comparable to earlier studies. Comparison of the measured isotopic composition of four meteorites with published data indicates that Cr isotope data measured by the technique described here are accurate to stated uncertainties. The stable Cr composition of the Bilanga and NWA 2999 achondrites suggests that the differences in the stable Cr isotope composition of Earth and chondrites may reflect heterogeneity of their precursor material rather than Cr isotope fractionation during metal-silicate segregation of Earth. Lastly, a step wise dissolution experiment of the CI chondrite Ivuna reveals previously unknown carriers of large mass-dependent Cr stable isotope variations that co-vary with the known presence of carriers of large nucleosynthetic anomalies, demonstrating one advantage of this technique. This journal is",
author = "Martin Schiller and {Van Kooten}, Elishevah and Holst, {Jesper Christian} and Olsen, {Mia Bj{\o}rg Stolberg} and Martin Bizzarro",
year = "2014",
doi = "10.1039/c4ja00018h",
language = "English",
volume = "29",
pages = "1406--1416",
journal = "Journal of Analytical Atomic Spectrometry",
issn = "0267-9477",
publisher = "Royal Society of Chemistry",
number = "8",

}

RIS

TY - JOUR

T1 - Precise measurement of chromium isotopes by MC-ICPMS

AU - Schiller, Martin

AU - Van Kooten, Elishevah

AU - Holst, Jesper Christian

AU - Olsen, Mia Bjørg Stolberg

AU - Bizzarro, Martin

PY - 2014

Y1 - 2014

N2 - We report novel analytical procedures allowing for the concurrent determination of the stable and mass-independent Cr isotopic composition of silicate materials by multiple collector inductively coupled mass spectrometry (MC-ICPMS). In particular, we focus on improved precision of the measurement of the neutron-rich isotope 54Cr. Because nitride and oxide interferences are a major obstacle to precise and accurate 54Cr measurements by MC-ICPMS, our approach is designed to minimize these interferences. Based on repeat measurements of standards, we show that the mass-independent 53Cr and 54Cr compositions can be routinely determined with an external reproducibility better than 2.5 and 5.8 ppm (2 sd), respectively. This represents at least a two-fold improvement compared to previous studies. Although this approach uses significantly more Cr (30-60 μg) than analysis by thermal ionization mass spectrometry (TIMS), our result indicate that it is possible to obtain an external reproducibility of 19 ppm for the μ54Cr when consuming amounts similar to that typically analyzed by TIMS (1 μg). In addition, the amount of time required for analysis by MC-ICPMS is much shorter thereby enabling a higher sample throughput. As a result of the improved analytical precision, we identified small apparent mass-independent differences between different synthetic Cr standards and bulk silicate Earth (BSE) when using the kinetic law for the mass bias correction. These differences are attributed to the Cr loss by equilibrium processes during production of the synthetic standards. The stable isotope data concurrently obtained have a precision of 0.05‰ Da-1, which is comparable to earlier studies. Comparison of the measured isotopic composition of four meteorites with published data indicates that Cr isotope data measured by the technique described here are accurate to stated uncertainties. The stable Cr composition of the Bilanga and NWA 2999 achondrites suggests that the differences in the stable Cr isotope composition of Earth and chondrites may reflect heterogeneity of their precursor material rather than Cr isotope fractionation during metal-silicate segregation of Earth. Lastly, a step wise dissolution experiment of the CI chondrite Ivuna reveals previously unknown carriers of large mass-dependent Cr stable isotope variations that co-vary with the known presence of carriers of large nucleosynthetic anomalies, demonstrating one advantage of this technique. This journal is

AB - We report novel analytical procedures allowing for the concurrent determination of the stable and mass-independent Cr isotopic composition of silicate materials by multiple collector inductively coupled mass spectrometry (MC-ICPMS). In particular, we focus on improved precision of the measurement of the neutron-rich isotope 54Cr. Because nitride and oxide interferences are a major obstacle to precise and accurate 54Cr measurements by MC-ICPMS, our approach is designed to minimize these interferences. Based on repeat measurements of standards, we show that the mass-independent 53Cr and 54Cr compositions can be routinely determined with an external reproducibility better than 2.5 and 5.8 ppm (2 sd), respectively. This represents at least a two-fold improvement compared to previous studies. Although this approach uses significantly more Cr (30-60 μg) than analysis by thermal ionization mass spectrometry (TIMS), our result indicate that it is possible to obtain an external reproducibility of 19 ppm for the μ54Cr when consuming amounts similar to that typically analyzed by TIMS (1 μg). In addition, the amount of time required for analysis by MC-ICPMS is much shorter thereby enabling a higher sample throughput. As a result of the improved analytical precision, we identified small apparent mass-independent differences between different synthetic Cr standards and bulk silicate Earth (BSE) when using the kinetic law for the mass bias correction. These differences are attributed to the Cr loss by equilibrium processes during production of the synthetic standards. The stable isotope data concurrently obtained have a precision of 0.05‰ Da-1, which is comparable to earlier studies. Comparison of the measured isotopic composition of four meteorites with published data indicates that Cr isotope data measured by the technique described here are accurate to stated uncertainties. The stable Cr composition of the Bilanga and NWA 2999 achondrites suggests that the differences in the stable Cr isotope composition of Earth and chondrites may reflect heterogeneity of their precursor material rather than Cr isotope fractionation during metal-silicate segregation of Earth. Lastly, a step wise dissolution experiment of the CI chondrite Ivuna reveals previously unknown carriers of large mass-dependent Cr stable isotope variations that co-vary with the known presence of carriers of large nucleosynthetic anomalies, demonstrating one advantage of this technique. This journal is

U2 - 10.1039/c4ja00018h

DO - 10.1039/c4ja00018h

M3 - Journal article

AN - SCOPUS:84904167541

VL - 29

SP - 1406

EP - 1416

JO - Journal of Analytical Atomic Spectrometry

JF - Journal of Analytical Atomic Spectrometry

SN - 0267-9477

IS - 8

ER -

ID: 120605054